About Fastfender
By the use of the Fastfender it is simply possible for everyone to attach and remove the fenders to your boat. You can also easily use the Fastfender with one hand. The fender height can be adjusted simply and quickly.
- Resistant to seawater and UV rays
- Resistant to temperatures of between -20 and +40 Celsius
- Fastfender 32 - fits on railings, tubes, steel wire and handrails up to 32mm.
Suitable for fender rope between 6mm and 10mm. - Fastfender 40 - fits on railings, tubes, steel wire and handrails up to 40mm.
Suitable for fender rope between 8mm and 12mm. - Does not scratch or damage the railings or handrails.
- Resistant to tractive forces of up 150 kg.
- 32's available in Light Grey, Blue and Black
- 40's available in Blue and Black.
How to use
Insert the rope (ø 6-12 mm) into the bottom of the hole, pull the loose end to the serrated opening and pull the rope vertically downwards through the serrations. It is now ready for use!
Securing
To prevent loss of the fender, tie a half knot or figure of eight knot in the loose end. Tip: lay the knot on the place which, when stopping against the hole, corresponds to the lowest position of the fender.
Attaching to the railing
Insert the hooks of the Fastfender around the railing from underneath (ø max. 32 mm). Turn the Fastfender a quarter of a turn and allow it to drop down with the hooks on the railing.
Hanging on steel wire
Insert the hooks of the Fastfender around the steel wire from underneath. Turn the Fastfender a quarter of a turn and allow to drop down with the hooks on the steel wire. Tip: place the hooks of the Fastfender on either side of the rail stanchion to keep it in place.
Hanging on the 2nd railing
If the railing is too thick for the hooks, use the lower second railing or the lower steel wire.
Adjusting the height
If the fender has to hang higher, pull the rope vertically downwards until it is in the correct position. If it needs to be hung lower, pull the rope outwards at an angle, allow the rope to slacken to the correct position and fix the rope between the serrations.
Various applications
The Fastfender can be used on railings and steel wire as well as on roof railings and other kinds of handrails.
For the rapid hanging, adjustment and stowing away of fenders
